Choose from one of the following 3 Sets:
| 1l One Step Photopolymer Emulsion & 1l Emulsion Remover Set |
| 500g One Step Photopolymer Emulsion & 500ml Emulsion Remover Set |
| 250g One Step Photopolymer Emulsion & 250ml Emulsion Remover Set |
Product Descriptions:
One Step Photopolymer Emulsion
Flat Fox PHU 2 one step is a pure photopolymer emulsion that is universally suitable for all inks, including solvent, water-based, and discharge inks.
If you haven't used a One Step Polymer before and are used to Diazo Emulsions, try this out, it's a great emulsion - not only does it have a really long shelf life, it exposes much faster and washes out easily.
This emulsion exposes up to 4 times faster than emulsions that are mixed with Diazo. This is great for when you want to get fine detail exposed on your screen and perfect for simpler designs too. Once exposed and cleaned out and dried, you can put your screen back onto your light for post exposure to make the stencil more water resistant.
Features and Benefits:
- Longer shelf life, up to 1 year from manufacture date !!
- Dyed red
- One-part, pre-sensitized. No mixing, no diazo required!
- Exposes approximately 4x faster than typical two-part emulsion
- 47% solids
- Medium viscosity easily coats all mesh counts
- Easy to reclaim
- Can be used with discharge inks as-is. No need for diazo.
STORAGE When sealed in the original container and stored in cool conditions, Flat Fox PHU 2 will maintain its original properties for one year from the date of production.
Emulsion Remover / Stencil Stripper / Decoating agent:
This Photo Emulsion Remover powder can be mixed with water, select your size to make either 1 Litre (1000ml), 500ml or 250ml of Stencil Remover solution. Comes in a metal screw off top container which can be reused after cleaning.
Powder offers several advantages:
- Economically priced and kinder to the planet- why ship water?
- Mix only the amount of solution you need
- If you need your solution to be stronger use less water
- "Emulsion Remover" Sticker is included so you can label and reuse your own spray bottle - refill don't landfill !
Technical Data Instructions for use:
1. Dissolve the contents into 1 litre, 500ml or 250ml of water (depending on which option you selected). This gives a 2% strong solution designed for rapid removal of stencils
2. Ensure screen is cleaned of ink residue
3. Rinse with water, apply stencil remover to both sides of screen and leave for 10-15 minutes. DO NOT ALLOW TO DRY
4. Rinse off thoroughly with water, preferably under pressure
5. For old stencils, repeat the procedure
Colour of decoating agent: White Powder
To return the goods please make sure they are unused and sealed.